Of course we have an input at the rear panel as well!
This amp is really great!
I had a look under the hood and I can tell this is a very nice build amp!
Top notch op amps were used and also the THAT4301P chip found its way into this monster.
I took some measurements as well.
When the amp is off I had a noise level of about 30 db and after switching it on of about 32 dB.
Means the fan is pretty silent, but I am already building something to improve that (more news to come).
But what really impressed me how silent the amp itself is. With the compressor disengaged and volume at maximum I did get only 38 dB of noise out of the DNS410.
If I would have played a note on my bass in this setting I would have had a "Back To The Future" experience
With the volume at 50% I already had something around 120 dB with the DNS410.
All measurements were done @ 1 m distance with a NTI Audio XL2!